Recco Belt 125

The Recco Belt 125 is made of flexible and robust material with a metal buckle and two integrated rescue reflectors for optimum searchability.

The Recco Belt offers maximum safety whilst in the mountains due to it always being attached to your ski trousers, in the case of an avalanche emergency the Recco belt should not come off of your ski trousers.

When heading out in off-piste terrain it is recommended to wear two Recco reflectors, We recommend combining the Recco belt with a Recco Helmet Reflector.

We also stock the Recco Belt 105 if the 125 Belt is to large.

If your looking for a Recco installed backpack then we highly recommend the Terrawest Core 22 Litre Backpack (Recco Installed)

Waist Size:

125 - M/L suits 30"- 40" Pants Waist Size

How does the Recco Reflector work?

Professional rescuers can quickly pinpoint a buried reflector-equipped person’s precise location using harmonic radar.
This two-part system consists of a RECCO detector used by professional rescue groups, which have a range of over 200 metres, and RECCO reflectors that are attached to clothing, helmets, protection gear, and boots worn by skiers and riders and other outdoor enthusiasts.
When used in conjunction with a RECCO Detector, the reflector's diode mixer acts as a harmonic generator to produce multiples of the frequencies received from the detectors.
The returned signal is translated into an audio tone whose volume is proportional to the returned signal, and by means of volume control, a trained rescue operator can literally go straight to the buried reflector once a signal is detected.
It is a non-powered device meaning that it never needs to be switched on, will never lose signal strength and needs no batteries to function. It is maintenance free and has a virtually unlimited life.
In total more than 850 search & rescue organizations in the world

Why is the Recco Reflector different to a normal avalanche transceiver?

The Recco Rescue System is different from Avalanche Transceivers because its a small band-aid size sticky transponder which is not powered, the reflector can be applied to your boots or helmet, the Recco detector does not contain any antennas and cannot be picked up by an avalanche beacon, the Recco detector has a range of over 200 metres which professional mountain rescue teams can pick up in the case of an avalanche.

Due to it not being a transceiver device the reflector will not lose signal strength and battery to function.

SAR Recco Rescue Helicopter

The SAR (search and rescue) helicopter service was first introduced in 2015 and is now found in several countries, and offers year-round missing persons services.

The Recco SAR technology is used by attaching the detector to a rope that is then dangled below the Recco rescue helicopter.

When the helicopter flies at a height of 100m, it is able to scan an area that is 100m wide.

When the speed of the helicopter is 100 km/h this translates to 1.2km coverage within six minutes. This equals to 30 football fields per minute.

SAR ski rescue helicopter services are used in the following countries :