Extensive Self-Check: Review of all relevant hardware and software elements as well as showing the current software version.
Perfectly Readable Display in all lighting conditions
Vibration at initial signal detection. This lets rescuers focus on the visual surface search during the signal search.
Perfect Mark-Performance due to exact signal processing without any performance losses
Pieps Interference Protection: The influence of external interferences is eliminated or reduced to a minimum: Protection in send mode with Auto-Antenna-Switch: If the transmitting antenna is impacted by external interference, the other antenna would take over the transmit function. Protection in search mode with Signal Verification: Only a verified 457kHz signal is indicated.
iProbe Support: The PIEPS PRO BT can be temporarily deactivated using the smart iPROBE. The receiving beacon automatically receives the next strongest signal.
Backup Mode: The PIEPS PRO BT is in send mode but the send signal is temporarily suppressed. So rescuers aren't disturbed during the search.
Auto Search-to-Send: This function automatically switches the PIEPS PRO BT from search mode to send mode, if the beacon is not moving for a certain time (in case of burial).
Group Check: Reviews the activity and transmission parameters of the partner device. PIEPS recommends to perform a group check before each tour.
Scan Function: The SCAN-function will give you an overview of all buried devices within the detectable range.
Victim Selection: The PIEPS PRO BT scans the entire receiving range. The closest 3 victims are indicated.
Analog Mode: The analog mode can be used for specific search strategies as well as for demo reasons.
TX600-Support: The PIEPS TX600 is a mini-transmitter for dogs and equipment that is transmitting out of the standard EN300718 and can be received with every PIEPS PRO BT.
Inclinometer: With the integrated three dimensional inclinometer the the punctual angle of the slope can be measured.
Carrying System: High wearing comfort at low weight, Neoprene pouch with soft shoulder strap, Quick-Pull-System for fast access to the device
Secure Slider Switch Mechansim: The switching from one position to another (OFF-SEND-SEARCH) is only possible with a secure 2-hand-activity. The two operating elements lock button (1) and slider (2) have to be forced at the same time and in different directions - only then a switching of the positions is possible.
Pieps Pro BT Tech Spec:
Maximum range: 60 m
Search strip width: 60 m
Dimensions (LxWxH): 118 x 76 x 29 mm
Weight incl. batteries: 230 g
Power supply: 3 batteries (AAA)
Battery lifetime (min. h): 600
Receiving frequency (kHz): 457
Transmission frequency (kHz, according to EN300718): 457